-
Best Price for High Density Polyethylene Wax - Low density cracking Polyethylene wax SX-21 – HAIXING
Product Properties: Melting point ℃ 120±3℃ Viscosity cps@140 ℃ 800 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Competitive Price for Oxidized Pe Wax For Internal Lubrication - LOW DENSITY OXIDIZED POLYETHYLENE WAX SX-62 – HAIXING
Product Introduction: Low density oxidized polyethylene wax SX- 62 is a processing aid for the rigid PVC industry. In the production process of rigid PVC, adding 1% -2% SX-62 can increase oustanding external lubrication and gloss and can pomote CPVC melt mass`s uniformity effectively .Excellent extenal and internal lubrication balance is the indispensble lubricant for the CPVC and meanwhile decrease melt mass`s viscosity and friction heat . Product properties: Index Value Unit Appearanc... -
Excellent quality Fischer Tropsch Wax For Hotmelt Adhesive - FISCHER-TROPSCH WAX F50 low melting point wax – HAIXING
Technical Data Melting point ℃ 50-58 Viscosity cps@140 ℃ 6-10 Penetration 0.1mm(25℃) ≤30 Thermal Stability h(12525℃) 24 Acide value mgkoh/g <0.1 Appearance White granule The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica- tion point ranges. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC prod... -
Lowest Price for Nonionic Polyethylene Wax Emulsion - Low density cracking Polyethylene wax SX-21 – HAIXING
Product Properties: Melting point ℃ 120±3℃ Viscosity cps@140 ℃ 800 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
OEM manufacturer Ft Wax In Hot Melt Adhesive - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
OEM Manufacturer Pe Wax In Coating - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Manufactur standard Polyethylene Wax Molecular Weight - High viscosity cracking Polyethylene wax SX-70 – HAIXING
Product Properties: Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 3000-5000 Penetration 4-6 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow... -
Reliable Supplier Pe Wax For Hot Melt Adhesive - Polypropylene Wax PPW-36(Lower crystalline) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 107-115 Viscosity (170 ℃) 8000-11000 Particle size 20mesh Characteristics and Purposes PPW-36 is a high viscosity polypropylene wax . Having excellent performance in pigments wetting and dispersion, which can effectively improve the quality of polyolefin masterbatches suit for high class field metallocene propylene – ethylene polymer wax,low crsytalline and excellent thermal stability and adhesive performance ,...
