-
LOW DENSITY OXIDIZED POLYETHYLENE WAX SX-62 – HAIXING
Product Introduction: Low density oxidized polyethylene wax SX- 62 is a processing aid for the rigid PVC industry. In the production process of rigid PVC, adding 1% -2% SX-62 can increase oustanding external lubrication and gloss and can pomote CPVC melt mass`s uniformity effectively .Excellent extenal and internal lubrication balance is the indispensble lubricant for the CPVC and meanwhile decrease melt mass`s viscosity and friction heat . Product properties: Index Value Unit Appearanc... -
Well-designed Recycling Polyethylene Twax - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Super Lowest Price Oxidized Polyethylene Wax For Transparent Pvc - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Special Design for Oxidized Pe Wax For External Lubrication - HIGH DENSITY OXIDIZED POLYETHYLENE WAX :SX-36 – HAIXING
Specification SX-36 Testing standard Softening point ℃ 140±5 ASTMN 1319 Density(g/cm3@25℃ 0.98-1 ASTMD1505 Penetration(dmm@25℃) ≤1 ASTMD1321 Molecular weight 8500-12000 ASTMD445 Acide value(mgKOH/g) 16±2 ASTMD1386 Appearance powder ……………… PVC transparent products/ransparent film lubricants SX-36 high-density oxidized polyetylene wax such as SX-36 shows outstanding performance for transparenet product application ,especially for PVC film produced by blowing and extrusion proc... -
Low price for Micronized Polyethylene Wax For Coating - Polymer synthetic POLYETHYLENE WAX: SX-110 – HAIXING
High melting point ,low viscosity polyethylene wax : Melting point ℃ 105-110 Viscosity mpa.s@140 ℃ 20-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣10 Appearance powder/flake/bead 1. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. 2. Used as efficient dispersant in masterbatch , filled masterbatch, m... -
Manufacturing Companies for Ft Wax For Defoamer - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Competitive Price for Polyethylene Wax Specifications - Polymer POLYETHYLENE WAX : SX-105 – HAIXING
High melt point polyehtylene wax Melting point ℃ 100-105 Viscosity 10-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣5 Appearance powder/flake/bead/granule Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. Used as efficient dispersant in masterbatch , filled masterbatch, modified masterbatch and functio... -
factory Outlets for Micronized Pe Wax Manfacturer - Micronized PE Wax MPE-43 – HAIXING
Technical Parameters Appearance Light yellow powder Dv50 4-6 Dv90 9 Melting Point ℃ 97-103 Characteristics and Purposes MPE-43 has fine particle size, high melting point, and excellent smoothness, grind ability, recoating, air permeability, anti-sticking, and good matting effect. It can be used for cellulose nitrate; acid cure resin paints to improve its grind ability. It can be added by high shear dispersing force facility or ball mill, stirring time should be not less than ...
