-
Oxidized Polyethylene wax SX-60 – HAIXING
Product properties: Index Value Unit Appearance Yellow flake Density 0.94 g/cm³ Melting point 100±5 ℃ Acid value 20±5 mgKOH/g Viscosity@ 150°C(302°F) 300-500 cps penetration@ 25°C(77°F) 1-4 dmm Product Advantages: Easy to be emulsify and disperse, It can be used in dying and the finishingprocess of clothing industry after emulsifying . It can increase the fabric`s soft performance .It also can be used in the production of water based ink and shoe polish ,the moisture-proofi... -
Factory Outlets Polyethylene Wax Binder - Low density cracking Polyethylene wax SX-21 – HAIXING
Product Properties: Melting point ℃ 120±3℃ Viscosity cps@140 ℃ 800 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Bottom price Fischer Tropsch Wax Process - Low melting point Fischer-tropsch wax SX-F60 – HAIXING
Low melting point Fishcer-tropsch wax Solidification point ℃ 60℃±2℃ Penetration 0.1mm@25 ℃ 18-25 Density G/cm3@25 ℃ 0.91 Acid value mg KOH/g 0.1Max Appearance White pallet Volatility (heat 2hours at 200 ℃) <0.5 Using advantage: Fischer-tropsch wax main mountain in 500-1000 relative molecular mass of straight chain, saturated high-carbon alkanes, it gives the chemical fine crystal structure, narrow melting point be used, low oil content, low penetration, low mobility and ... -
OEM/ODM Manufacturer Pe Wax For Plastics Processing - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Cheap PriceList for Pe Wax Use In Rubber As Protective Agent - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Polymer synthetic POLYETHYLENE WAX: SX-110 – HAIXING
High melting point ,low viscosity polyethylene wax : Melting point ℃ 105-110 Viscosity mpa.s@140 ℃ 20-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣10 Appearance powder/flake/bead 1. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. 2. Used as efficient dispersant in masterbatch , filled masterbatch, m... -
18 Years Factory Low Melting Polyethylene Wax - Low density cracking Polyethylene wax SX-21 – HAIXING
Product Properties: Melting point ℃ 120±3℃ Viscosity cps@140 ℃ 800 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
China wholesale Plastic Lubrication Additives - Polypropylene Wax PPW-25(Low melting point ) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 99-103 Viscosity (170 ℃) 1500-2100 Particle size 20mesh Characteristics and Purposes PPW-25 is suit for high class field metallocene propylene – ethylene polymer wax,low melting point , low crsytalline and excellent thermal stability ,adhesive peformance ,chemical resistance , wetting dispersion, compatibility with other wax .strong cohesion . and high price/performance . Contents and Methods of Use Hot melt adh...
