-
Factory For Pe Wax At 140degrese - Polypropylene Wax PPW-36(Lower crystalline) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 107-115 Viscosity (170 ℃) 8000-11000 Particle size 20mesh Characteristics and Purposes PPW-36 is a high viscosity polypropylene wax . Having excellent performance in pigments wetting and dispersion, which can effectively improve the quality of polyolefin masterbatches suit for high class field metallocene propylene – ethylene polymer wax,low crsytalline and excellent thermal stability and adhesive performance ,... -
Excellent quality Ope Wax For Rubber Industry - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
Well-designed Recycling Polyethylene Twax - Low density and cracking Polyethylene wax SX-50 – HAIXING
Melting point ℃ 105±3℃ Viscosity cps@140 ℃ 400-500 Penetration 4-5 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow to higher pigment`s concentration . B... -
CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Hot-selling Fischer-Tropsch Wax Properties - Low melting and segment Fischer-tropsch wax :SX-F70 – HAIXING
Low melting point Fishcher-tropsch wax Product Specification : Solidification point ℃ 70℃±2℃ Penetration 0.1mm@25 ℃ 10-16 Density G/cm3@25 ℃ 0.91 Acid value mg KOH/g 0.1Max Oil content % 6Max Appearance White pallet Volatility (heat 2hours at 200 ℃) <0.5 Product applications: High grade rubber protective wax Rubber and plastic processing Demould Package and storage F.T.WAX is packed in kraft paper and woven bags with internal plastic bags or polyethylene woven bags w... -
Special Design for Microcrystalline And Polyethylene Wax - High viscosity cracking Polyethylene wax SX-70 – HAIXING
Product Properties: Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 3000-5000 Penetration 4-6 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow... -
Cheap price Oxidized Polyethylene Wax Properties - Cracking POLYEHTYLENE WAX : SX-115 – HAIXING
Specification SX-115 Te sting standard Melting point ℃ 115±5 ASTM D87 Viscosity 300-400 ASTM D445 Density(g/cm3@25℃ 0.93 ASTM D1505 Penetration(dmm@25℃) 2﹣4 ASTM D1321 Molecular weight 4500 ………… Appearance powder Lubricating –Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. offering both internal and external lubrication due to decreased friction Wetting and dispersi... -
Personlized Products Micronized Professinal Manufacturer - Micronized Polypropylene Wax PPW-93 – HAIXING
Technical Parameters Appearance White Powder Dv50 6-7 Dv90 14-15 Melting Point ℃ 142 Characteristics and Purposes PPW-93 has uniform particle size and shape, high melting point, good transparency, and can be easily dispersed. PPW-0936 is suitable for solvent-based coating, provides help on extinction, can improve scratch resistance, and blocking resistance under higher temperatures. PPW-93 has synergistic effect, helps to prevent the precipitation of the silica matting agent....
