-
Factory wholesale Low Molecular Weight Polyethylene Wax - Polymer synthetic POLYETHYLENE WAX: SX-110 – HAIXING
High melting point ,low viscosity polyethylene wax : Melting point ℃ 105-110 Viscosity mpa.s@140 ℃ 20-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣10 Appearance powder/flake/bead 1. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. 2. Used as efficient dispersant in masterbatch , filled masterbatch, m... -
Micronized PE Wax MPE-21 for high gloss coatings. – HAIXING
Technical Parameters Appearance White Powder Dv50 4-6 Dv90 9 Melting Point ℃ 110 Characteristics and Purposes MPE-21 has uniform particle size, with very good dispersability and gloss control, used as the excellent additive for high gloss coatings. It is suitable for solvent-based flexo inks and gravure inks. It can improve the abrasion resistance, and reduce the coefficient of friction of solvent-based inks. It makes the ink of the benzene soluble and alcohol-soluble ink to h... -
Fast delivery Oxidized Polyethylene Wax Msds - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Low price for Sasol Fischer Tropsch Wax - Low melting point Fischer-tropsch wax SX-F60 – HAIXING
Low melting point Fishcer-tropsch wax Solidification point ℃ 60℃±2℃ Penetration 0.1mm@25 ℃ 18-25 Density G/cm3@25 ℃ 0.91 Acid value mg KOH/g 0.1Max Appearance White pallet Volatility (heat 2hours at 200 ℃) <0.5 Using advantage: Fischer-tropsch wax main mountain in 500-1000 relative molecular mass of straight chain, saturated high-carbon alkanes, it gives the chemical fine crystal structure, narrow melting point be used, low oil content, low penetration, low mobility and ... -
Hot sale Ope Wax Of China - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
OEM Manufacturer Pe Wax In Coating - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
PriceList for High Melting Pe Wax - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Manufacturing Companies for Chlorinated Polyethylene Wax - Cracking POLYEHTYLENE WAX : SX-115 – HAIXING
Specification SX-115 Te sting standard Melting point ℃ 115±5 ASTM D87 Viscosity 300-400 ASTM D445 Density(g/cm3@25℃ 0.93 ASTM D1505 Penetration(dmm@25℃) 2﹣4 ASTM D1321 Molecular weight 4500 ………… Appearance powder Lubricating –Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. offering both internal and external lubrication due to decreased friction Wetting and dispersi...
