-
Super Purchasing for Pe Micronized Wax Market - Micronized PE Wax MPE-20 for solvent-based flexo-printing ink – HAIXING
Technical Parameters Appearance White Powder Dv50 7 Dv90 18 Melting Point ℃ 110 Characteristics and Purposes 1 Micronized wax which is suitable for solvent-based flexo-printing ink, as well as solvent-based gravure printing ink, can improve the abrasion resistance, and scratch resistance when used in solvent-based ink. MPE-20can reduce the coefficient of friction in different kinds of inks. What’s more, MPE-20 has good adaptability in benzene soluble ink, alcohol soluble ink a... -
FISCHER-TROPSCH WAX F50 low melting point wax – HAIXING
Technical Data Melting point ℃ 50-58 Viscosity cps@140 ℃ 6-10 Penetration 0.1mm(25℃) ≤30 Thermal Stability h(12525℃) 24 Acide value mgkoh/g <0.1 Appearance White granule The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica- tion point ranges. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC prod... -
LOW DENSITY OXIDIZED POLYETHYLENE WAX SX-62 – HAIXING
Product Introduction: Low density oxidized polyethylene wax SX- 62 is a processing aid for the rigid PVC industry. In the production process of rigid PVC, adding 1% -2% SX-62 can increase oustanding external lubrication and gloss and can pomote CPVC melt mass`s uniformity effectively .Excellent extenal and internal lubrication balance is the indispensble lubricant for the CPVC and meanwhile decrease melt mass`s viscosity and friction heat . Product properties: Index Value Unit Appearanc... -
Well-designed Recycling Polyethylene Twax - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Super Lowest Price Oxidized Polyethylene Wax For Transparent Pvc - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Special Design for Oxidized Pe Wax For External Lubrication - HIGH DENSITY OXIDIZED POLYETHYLENE WAX :SX-36 – HAIXING
Specification SX-36 Testing standard Softening point ℃ 140±5 ASTMN 1319 Density(g/cm3@25℃ 0.98-1 ASTMD1505 Penetration(dmm@25℃) ≤1 ASTMD1321 Molecular weight 8500-12000 ASTMD445 Acide value(mgKOH/g) 16±2 ASTMD1386 Appearance powder ……………… PVC transparent products/ransparent film lubricants SX-36 high-density oxidized polyetylene wax such as SX-36 shows outstanding performance for transparenet product application ,especially for PVC film produced by blowing and extrusion proc... -
Low price for Micronized Polyethylene Wax For Coating - Polymer synthetic POLYETHYLENE WAX: SX-110 – HAIXING
High melting point ,low viscosity polyethylene wax : Melting point ℃ 105-110 Viscosity mpa.s@140 ℃ 20-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣10 Appearance powder/flake/bead 1. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. 2. Used as efficient dispersant in masterbatch , filled masterbatch, m... -
Manufacturing Companies for Ft Wax For Defoamer - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro...
