-
Factory Outlets Synthetic Wax For Rubber Products - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Special Price for Polyethylene Wax Oxidizes - Low density cracking Polyethylene wax SX-21 – HAIXING
Product Properties: Melting point ℃ 120±3℃ Viscosity cps@140 ℃ 800 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Online Exporter Hdpe Oxidized Pe Wax - Oxidized Polyethylene wax SX-60 – HAIXING
Product properties: Index Value Unit Appearance Yellow flake Density 0.94 g/cm³ Melting point 100±5 ℃ Acid value 20±5 mgKOH/g Viscosity@ 150°C(302°F) 300-500 cps penetration@ 25°C(77°F) 1-4 dmm Product Advantages: Easy to be emulsify and disperse, It can be used in dying and the finishingprocess of clothing industry after emulsifying . It can increase the fabric`s soft performance .It also can be used in the production of water based ink and shoe polish ,the moisture-proofi... -
Special Design for Oxidized Pe Wax For External Lubrication - HIGH DENSITY OXIDIZED POLYETHYLENE WAX :SX-36 – HAIXING
Specification SX-36 Testing standard Softening point ℃ 140±5 ASTMN 1319 Density(g/cm3@25℃ 0.98-1 ASTMD1505 Penetration(dmm@25℃) ≤1 ASTMD1321 Molecular weight 8500-12000 ASTMD445 Acide value(mgKOH/g) 16±2 ASTMD1386 Appearance powder ……………… PVC transparent products/ransparent film lubricants SX-36 high-density oxidized polyetylene wax such as SX-36 shows outstanding performance for transparenet product application ,especially for PVC film produced by blowing and extrusion proc... -
Super Lowest Price Oxidized Polyethylene Wax For Transparent Pvc - Cracking POLYEHTYLENE WAX : SX-115 – HAIXING
Specification SX-115 Te sting standard Melting point ℃ 115±5 ASTM D87 Viscosity 300-400 ASTM D445 Density(g/cm3@25℃ 0.93 ASTM D1505 Penetration(dmm@25℃) 2﹣4 ASTM D1321 Molecular weight 4500 ………… Appearance powder Lubricating –Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. offering both internal and external lubrication due to decreased friction Wetting and dispersi... -
LOW DENSITY OXIDIZED POLYETHYLENE WAX SX-62 – HAIXING
Product Introduction: Low density oxidized polyethylene wax SX- 62 is a processing aid for the rigid PVC industry. In the production process of rigid PVC, adding 1% -2% SX-62 can increase oustanding external lubrication and gloss and can pomote CPVC melt mass`s uniformity effectively .Excellent extenal and internal lubrication balance is the indispensble lubricant for the CPVC and meanwhile decrease melt mass`s viscosity and friction heat . Product properties: Index Value Unit Appearanc... -
Short Lead Time for Lubrizol Oxidized Pe Wax - Oxidized Polyethylene wax SX-60 – HAIXING
Product properties: Index Value Unit Appearance Yellow flake Density 0.94 g/cm³ Melting point 100±5 ℃ Acid value 20±5 mgKOH/g Viscosity@ 150°C(302°F) 300-500 cps penetration@ 25°C(77°F) 1-4 dmm Product Advantages: Easy to be emulsify and disperse, It can be used in dying and the finishingprocess of clothing industry after emulsifying . It can increase the fabric`s soft performance .It also can be used in the production of water based ink and shoe polish ,the moisture-proofi... -
Micronized PE WAX MPE-51 – HAIXING
Appearance Light yellow Powder Melting point ℃ 110 Particle size μm Dv 50 6 Particle size μm Dv 90 15 Characteristics and Purposes MPE-51 is a polyethylene wax used for water-based and solvent-based systems, and is compatible for water-based and solvent-based ink and coatings. MPE-51 can be used for water-based inks, and water-based paints which provides adhesion resistance, scratch resistance, abrasion resistance, dirt resistance, and so on. Also provides good gloss,...
