-
High Quality for Polyethylene Homopolymer Wax - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Good quality Ope Wax For Pvc Products - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
OEM Factory for Polyethylene Wax Powder - Low density and cracking Polyethylene wax SX-50 – HAIXING
Melting point ℃ 105±3℃ Viscosity cps@140 ℃ 400-500 Penetration 4-5 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow to higher pigment`s concentration . B... -
Super Lowest Price Oxidized Polyethylene Wax For Transparent Pvc - Polymer synthetic POLYETHYLENE WAX: SX-110 – HAIXING
High melting point ,low viscosity polyethylene wax : Melting point ℃ 105-110 Viscosity mpa.s@140 ℃ 20-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣10 Appearance powder/flake/bead 1. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. 2. Used as efficient dispersant in masterbatch , filled masterbatch, m... -
Reliable Supplier Pe Wax For Hot Melt Adhesive - Polypropylene Wax PPW-36(Lower crystalline) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 107-115 Viscosity (170 ℃) 8000-11000 Particle size 20mesh Characteristics and Purposes PPW-36 is a high viscosity polypropylene wax . Having excellent performance in pigments wetting and dispersion, which can effectively improve the quality of polyolefin masterbatches suit for high class field metallocene propylene – ethylene polymer wax,low crsytalline and excellent thermal stability and adhesive performance ,... -
Renewable Design for Polyethylene Wax Dsc - Polymer POLYETHYLENE WAX : SX-105 – HAIXING
High melt point polyehtylene wax Melting point ℃ 100-105 Viscosity 10-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣5 Appearance powder/flake/bead/granule Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. Used as efficient dispersant in masterbatch , filled masterbatch, modified masterbatch and functio... -
Factory Price For Polyethylene Wax Formula - Low density and cracking Polyethylene wax SX-50 – HAIXING
Melting point ℃ 105±3℃ Viscosity cps@140 ℃ 400-500 Penetration 4-5 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow to higher pigment`s concentration . B... -
Special Design for Microcrystalline And Polyethylene Wax - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment...
