-
8 Year Exporter Ft Wax For Fiber Products - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
PriceList for Fischer Tropsch Wax For Stabilizer - FISCHER-TROPSCH WAX F50 low melting point wax – HAIXING
Technical Data Melting point ℃ 50-58 Viscosity cps@140 ℃ 6-10 Penetration 0.1mm(25℃) ≤30 Thermal Stability h(12525℃) 24 Acide value mgkoh/g <0.1 Appearance White granule The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica- tion point ranges. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC prod... -
One of Hottest for Polyethylene Wax Density - Polymer synthetic POLYETHYLENE WAX: SX-110 – HAIXING
High melting point ,low viscosity polyethylene wax : Melting point ℃ 105-110 Viscosity mpa.s@140 ℃ 20-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣10 Appearance powder/flake/bead 1. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. 2. Used as efficient dispersant in masterbatch , filled masterbatch, m... -
OEM Supply Polyethylene Wax Cas Number - Low density and cracking Polyethylene wax SX-50 – HAIXING
Melting point ℃ 105±3℃ Viscosity cps@140 ℃ 400-500 Penetration 4-5 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow to higher pigment`s concentration . B... -
OEM Manufacturer Polyethylene Wax Emulsion - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
PriceList for High Melting Pe Wax - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
18 Years Factory Low Melting Polyethylene Wax - Polymer POLYETHYLENE WAX : SX-105 – HAIXING
High melt point polyehtylene wax Melting point ℃ 100-105 Viscosity 10-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣5 Appearance powder/flake/bead/granule Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. Used as efficient dispersant in masterbatch , filled masterbatch, modified masterbatch and functio... -
Hot sale Fischer Tropsch Wax For Stablizer - The refined Fischer-tropsch wax :SX-F100 – HAIXING
High melting point Fischer-tropsch wax: Melting point ℃ 105±5℃ Viscosity cps@140 ℃ 5-8 Penetration 6-10 Density G/cm3@25 ℃ 0.91-0.94 Oil content % ≤3 Appearance White powder /small round flake bead Application: PVC processing PVC heat stabilizer Filler masterbatch Hot melt adhesive Brightener Premium shoes cream Package and storage F.T.WAX is packed in kraft paper and woven bags with internal plastic bags with 25KG each net weight. It must not be drenched by rain and scorc...
