-
2022 New Style Ft Wax Foruse As Softene For Textile - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
New Fashion Design for Polyethylene Wax Cosmetics - Low density and cracking Polyethylene wax SX-50 – HAIXING
Melting point ℃ 105±3℃ Viscosity cps@140 ℃ 400-500 Penetration 4-5 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow to higher pigment`s concentration . B... -
Hot-selling Fischer-Tropsch Wax Properties - High melting point Fischer-tropsch wax : SX-F110 – HAIXING
High melting point Fischer-tropsch wax Congealing point ℃ >100 Melting point ℃ 108-112 Viscosity cps@140 ℃ 5-10 Penetration0.1mm(25 ℃) <1 Volatility <0.5 Density G/cm3@25 ℃ 0.91-0.94 Appearance White prill The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica-tion point ranges. The Fischer-tropsch`s wax used in color masterbatch ... -
OEM Manufacturer Pe Wax In Coating - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
Factory source Oxidized Polyethylene Wax Structure - Polymer POLYETHYLENE WAX : SX-105 – HAIXING
High melt point polyehtylene wax Melting point ℃ 100-105 Viscosity 10-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣5 Appearance powder/flake/bead/granule Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. Used as efficient dispersant in masterbatch , filled masterbatch, modified masterbatch and functio... -
China OEM Pe Wax In Rubber - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
OEM/ODM Factory Pe Wax For Pvc Processing - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
Reasonable price Fischer Tropsch Wax For Pvc Products - High melting Fischer-tropsch wax : SX-F115 – HAIXING
High melting point Fischer-tropsch wax： Congealing point ℃ >105 Melting point ℃ 110-115 Viscosity cps@140 ℃ 5-10 Penetration0.1mm(25 ℃) <1 Volatility <0.5 Density G/cm3@25 ℃ 0.91-0.94 Appearance White prill The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica-tion point ranges. The Fischer-tropsch`s wax used in color masterbatch a...
