18 Years Factory Low Melting Polyethylene Wax - Low density and cracking Polyethylene wax SX-50 – HAIXING

Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow to higher pigment`s concentration .
Better thermal stability .
Higher pigment loading capacity of up to 75% inorganic pigments .
Wider compatibility ,not only for polyolefin but also for engineering plastics .
Can reduce the degradation of pigment
Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic.
Act as the dispersant for masterbatches, pigment, carbon black, additive for parent material, filling parent material and other pigments.
Applied in the field of hot melt road marking material.
Act as the additive for shoeshine, floor wax, car wax, polishing wax, chinaware, pill wax, paint, coating, cable, carbon paper, wax paper, textile softening agent etc.
The additive for rubber process and car anti-rust agent etc.

Product applications:
PVC processing
Color masterbatch pigment
Waterproof roll
Asphalt
Hot melt adhesive
Rubber processing
Road marking

Package And Storage
Polyethylene wax is packed in woven bags with internal plastic bags with 25KG each net weight. It must not be drenched by rain and scorched by sun. It can be stored for two years.